Table of Contents
Advertisement
4-3 Data Hold
1) During the measurement, press the " Hold Button "
( 3-4, Fig. 1 ) momentarily to hold the measured
value. The LCD will show a " HOLD " symbol.
2) Press the " Hold Button " once again to release the
data hold function.
4-4 Data Record ( Max., Min. reading )
1) The data record function records the maximum and
minimum readings. Press the " REC Button " ( 3-5, Fig. 1 )
momentarily to start the Data Record function,
shows " REC " on the display.
2) With the " REC " symbol on the display.
a) Press the " REC Button " ( 3-5, Fig. 1 ) momentarily,
the " REC MAX " symbol along with the maximum
value will appear on the display.
b)Press the " REC Button " ( 3-5, Fig. 1 ) momentarily
again, the " REC MIN " symbol along with the
minimum value will appear on the display.
When display shows " REC MAX " or " REC MIN ",
* press the " Hold Button " ( 3-4, Fig. 1 )
momentarily will delete the max. ( min. ) value,
the display will show the " REC. " only and
execute the memory function continuously.
c) To exit the memory record function, press the
" REC " button for 2 seconds at least. The display will
revert to the current reading, not show " REC "
indicator.
4-5 Auto power off management
The meter has built-in "Auto Power Shut-off " function in
order to prolong battery life. The meter will switch off
automatically if none of the buttons are pressed within
10 min..
8
Advertisement
Table of Contents
