Download  Print this page

Troubleshooting - Xerox XM9-23w User Manual

Proview user's guide lcd monitor xm9-23w
Hide thumbs

Advertisement

Troubleshooting

Xerox© LCD Monitor User's Manual
Before consulting service personnel, check the following
chart for a possible cause and solution to the trouble you are
experiencing.
Monitor will not turn on
• Make sure the power cord is plugged in.
No picture
• Make sure the power cord is plugged in.
• Check the signal cable connecting the LCD monitor
and the computer (refer to page 14-17).
• Press the POWER/
monitor.
Poor picture or abnormal picture
• Check the signal cable connecting the LCD monitor
and the computer (refer to page 14-17).
• Press the
options in the OSD.
• Adjust the Color Select option in the OSD.
• Press the
to automatically adjust the display mode.
Out of range message appears
• Press the
to automatically adjust the display mode.
• Press the
and H Size options in the OSD.
• If using Windows 9X/2000/XP, wait a few seconds;
once Windows detects the problem, a dialog will
appear allowing you to manually set up the video
mode according to the preset mode timing chart
(refer to page 29).
button on the front panel of the
button to adjust the Brightness Contrast
button on the front panel of the monitor,
button on the front panel of the monitor,
button to adjust the V Position, H Position
Technical Information
33

Advertisement

Table of Contents
loading

  Related Manuals for Xerox XM9-23w