Troubleshooting - Xerox XAP series User Manual

Troubleshooting

Xerox© LCD Monitor User's Manual
Before consulting service personnel, check the following
chart for a possible cause and solution to the trouble you are
experiencing.
Monitor will not turn on
• Make sure the power cord is plugged in.
No picture
• Make sure the power cord is plugged in.
• Check the signal cable connecting the LCD monitor
and the computer (refer to page 12-14).
• Press the POWER button on the front panel of the
monitor.
Poor picture or abnormal picture
• Check the DVI cable connecting the LCD monitor and
the computer (refer to page 12-14).
• Press the MENU button to adjust the Brightness
Contrast option in the OSD.
• Adjust the Color Select option in the OSD.
• Press the AUTO button on the front panel of the
monitor, to automatically adjust the display mode.
Out of range message appears
• Press the MENU button. Highlight the INPUT SELECT
icon, then press the MENU button. Press the UP or
DOWN button to select DIGITAL INPUT
(refer to page 15).
• If using Windows 9X/2000/XP, wait a few seconds;
once Windows detects the problem, a dialog will
appear allowing you to manually set up the video
mode according to the preset mode timing chart
(refer to page 25).
Technical Information
29