Download  Print this page

Method 2: Digital (Dvi) Connection - Xerox XM9-23w User Manual

Proview user's guide lcd monitor xm9-23w
Hide thumbs

Advertisement

Installation

Method 2: Digital (DVI) Connection

16
1
Turn off the computer and unplug the power cable.
2
Connect the signal cable (DVI-D) to the DVI port on the back
of the computer.
3
Connect the audio cable to the line-in port on the back of the
computer.
4
If you would like to listen to PC audio with a headphone,
connect the audio out port to the headphone.
5
Connect the DC plug of the AC-DC adapter to the DC 24V
port at the rear of the monitor. Connect the power cord to the
AC-DC adapter and wall outlet.
6
Press the
button, located on the bottom side of the main
unit to turn the monitor on, then turn the computer on. If the
monitor displays an image, the monitor is successfully
installed. If no image is displayed, check all connections.
Xerox© LCD Monitor User's Manual

Advertisement

Table of Contents
loading

  Related Manuals for Xerox XM9-23w