Maintenance; Recommended Maintenance Schedule(S) - Toro Workman GTX Operator's Manual

Maintenance

Note:
Determine the left and right sides of the machine from the normal operating position.
Note:
Download a copy of the electrical schematic by visiting www.Toro.com and searching for your machine
from the Manuals link.
WARNING
Failure to properly maintain the machine could result in premature failure of machine systems
causing possible harm to you or bystanders.
Keep the machine well maintained and in good working order as indicated in these instructions.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 100 hours
Before each use or daily
Every 25 hours
Every 100 hours
Every 300 hours
Every 400 hours
Every 800 hours
Every 1,000 hours
Maintenance Procedure
• Perform the breaking in a new machine guidelines.
• Check the tire pressure.
• Charge the batteries.
• Check the water level of the batteries.
• Check the brake-fluid level.
• Clean the batteries.
• Check the water level of the batteries and add distilled or deionized water to the
batteries (if necessary).
• Grease the bearings and bushings.
• Check the condition of the tires and rims.
• Torque the wheel-lug nuts.
• Check the front wheel camber and toe-in.
• Check the transaxle-fluid level.
• Check the transaxle for leaks.
• Inspect the brakes.
• Grease the front wheel bearings.
• Replace the service and parking-brake pads.
• Change the transaxle fluid.
• Change the brake fluid.
26