Advertisement
Thank you for purchasing Promise Technology's SuperSwap. The SuperSwap
drive housing installs easily into any 5.25" component bay in your PC.
SuperSwap's drive carrier and housing extend the data storage capabilities of
your system by allowing you to easily swap most 3.5" form factor ATA hard
drives in and out of your PC, without the hassle of opening and closing your
PC's case. SuperSwap accepts Ultra ATA/100 and Ultra ATA/66 drives. When
used with Promise Technology's ATA RAID 1, 3, or 5 products
allows users to "hot swap" a failed drive without powering down a system while
fully protecting hard drive and internal system components.
Specifications
Interface
Fits most 3.5" form factor ATA hard disk drives
Standard ATA/IDE interface
Supports Ultra ATA/100 and Ultra ATA/66 drives and cables
Built-in Power/Drive Status LED and Drive Activity LED indicators
**Built in Monitoring of SuperSwap Fan RPM, Temperature & Voltage
levels with installation of FastCheck or SuperCheck Monitoring software.
Housing Assembly
Dedicated cooling fan
Keyed locking mechanism
Spring-loaded pivoting access door
Drive Carrier
Durable metal construction
Fully-ventilated
Unique handle design automatically unplugs drive chassis from housing
when pulled up
Removable drive access cover
Physical/Environmental
Dimensions
Housing Assembly: 8.5" x 5.75" x 1.625" (21.59cm x14.605cm x4.128cm)
Drive Carrier: 7.75" x 4.625" x 1.625" (19.685cm x 11.748cm x 4.128cm)
Operating Temperature
32°F to 122°F (0°C to 50°C)
Relative Humidity
1
SuperTrak100, SuperTrak66, FastTrak100, FastTrak66
SuperSwap Manual
Introduction
1
1
, SuperSwap
Advertisement
