Preparations For Riding; Making Adjustments - Whyte G-150 Works SCR Supplementary Service Manual

2.5: Whyte M-109C Geometry
Frame Size X
Head Angle A
Seat Angle B
Top Tube C
BB Height* D
Stand Over E
Wheel Base F
Chain Stay G
Seat Post H
Notes:
Geometry shown here is 'Showroom' i.e. without rider aboard the bicycle. 'With Sag' geometry is with rider after correct
sag is set at front and rear. Please refer to suspension set up for information on how to achieve the correct sag of the
fork and rear damper.
* Effective seat angle, from wheel centres horizontal to line from BB to seat post axis @ top of saddle.
** BB height with Ø748mm tyres fitted (29" x 2.25" / 54/56-622)

3.0: PREPARATIONS FOR RIDING

3.1: MAKING ADJUSTMENTS

Please refer to the specific component manufac-
turers manual or published technical information
about adjusting the components on your Whyte
bike. Instructions may be downloaded from the
relevant manufacturer's internet site, as shown
in the table to the right.
CAUTION! If you are uncertain in any
way, about making adjustments to any
components on you Whyte bike, then DO
NOT RIDE YOUR BIKE.
Contact your Whyte dealer who will be able to
advise you on how to go about setting up you
Whyte bike for riding, and or making adjust-
ments to the components fitted to your Whyte
bike.
Page 8
WHYTE Service Manual
Small Medium
69.5° 69.5°
74.2° 74.0°
578.9mm 598.9mm
335mm 335mm
795mm 797mm
1105.3mm 1125.3mm
431.4mm 431.4mm
30.9mm 30.9mm
Large Extra—Large
69.5°
73.8°
613.7mm 628.7mm
335mm 335mm
801mm 805mm
1140.3mm 1155.3mm
431.4mm 431.4mm
30.9mm 30.9mm
DT Swiss www.dtswiss.com
Easton
www.eastonbike.com
Ergon www.ergon-bike.com
Fi:zik www.fizik.it
Fox
www.foxracingshox.com
FSA www.fullspeedahead.com
Jagwire www.jagwireusa.com
Maxxis
www.maxxis.com
Prologo www.prologotouch.com
Race Face www.raceface.com
Shimano
www.shimano.com
SR Suntour www.srsuntour-cycling.com
SRAM
www.sram.com
WTB www.wtb.com
X-Fusion
www.xfusionshox.com
69.5°
73.7°
2015 Edition 1