Whyte G-150 Works SCR Supplementary Service Manual page 39

and replace the seat-post (7) in the specified order.
Item:
1 M6 x 30mm Capscrew
2
3
4
5
6
7
Figures 28 to 29. From the right side of
the Main Frame (6) unscrew & remove
the M6 x 30 long Capscrew (1).
place that with the longer capscrew and
screw loosely into the Threaded Sleeve
(5).
Figures 30 & 31.
Sleeve (5) all the way out of the oppo-
site side of the Main Frame (6).
Figures 32 to 33. Move to the left side
of the Main Frame (6). Place the M6 x
30 long Capscrew
through the Grip Pad (4) and onto the
Plain Sleeve (2).
Sleeve (2) all the way out of the right
side of the Main Frame (6).
2015 Edition 1
WHYTE Service Manual
Description
Plain Sleeve
'O' ring
Grip Pad
Threaded Sleeve
Main Frame
Seat Post
Re-
Push the Threaded
(1) diagonally
Then push the Plain
Figure 27: Inter Grip Seat Clamp
Figure 28
Figure 30
Figure32
Figure 29
Figure 31
Figure 33
Page 39