Technical Specifications - Robe ColorStrobe IP User Manual

6. Technical specifications

Power supply
• Electronic auto-ranging
• Input voltage (EU): 100 - 240V AC, 50-60 Hz
• Input voltage (US): 100 - 277V AC, 50-60 Hz
• Max. power consumption: 440W
• Inrush current: 20A (at 230V), 30A (at 115V)
Optic & Effects
• Light source:
• Beam angle: 35°
• 6 LED zones
• Min. LED life expectancy: 20,000 hours
Virtual colour wheel
• 237 colours including whites (2700K, 3200K, 4200K, 5600K and 8000K)
• Halogen lamp effect at whites 2700K and 3200K Rainbow effect with in both directions with variable
speed
Zone effects
•Zone effects in both directions with variable speed
Strobe
•Strobe effect with variable speed
•Pulses adjustment: frequency, duration, intensity
•Special effects: rump up, rump down, rump up/down, random, lighting, spikes
Dimmer
• Smooth 16-bit dimming from 0 - 100 %
Control
• Setting & Addressing: 4-segment LED display & 4 control buttons
• Control: USITT DMX 512 (RDM support)
• DMX protocol modes: 5 (9,14,18,28, 42 control channels)
• Operations modes: DMX, Stand-alone
• Manual control of all effects via control panel
• One editable program, up to 40 steps
Wireless DMX/RDM module (only for wireless DMX version of the Strobe IP)
• Compliance with USITT DMX-512 (1986 & 1990) and 512-A
• Full DMX fidelity and frame integrity
• Auto sensing of DMX frame rate and frame size
• <5ms DMX latency
• Operational frequency range of 2402-2480 MHz
• Producer: LumenRadio
Connection
• 2x Outdoor DMX cable CA-0611 + 2x 5-pin XLR (male,female IP 67)
• 1x mains cable with plug
Mounting
• via Universal base adaptor for Strobe IP
x high power RGBW multichip LED
60
ColorStrobe IP
19