Special Functions - Robe ColorStrobe IP User Manual

2. Press the ENTER button. The selected program runs in a loop.
Edit --- Editing a program. The fixture offers a freely editable program up to 40 steps. Every program step includes
a step time-the total time occupied by the step in the program.
1. Use the UP/DOWN buttons to select a desired program step ("St. 1" - "St.40") and press ENTER button.
2. Use the UP/DOWN buttons to select a channel you want to edit and press the ENTER button.
List of editable items:
"P.End" - a total number of the program steps (value 1-40). This value should be set before start of
programming (e.g. if you want to create a program with 10 steps, set P.End=10).
"rE.Fo" – a red LEDs saturation coarse- foreground
"Gr.Fo" – a green LEDs saturation coarse -foreground
"bL.Fo" – a blue LEDs saturation coarse -foreground
"Uh.Fo" – a white LEDs saturation coarse -foreground
"Cto" – a colour temperature correction
"Vir.C" – a virtual colour
"di.Fo" – a dimmer coarse -foreground
"dUrA." – a duration
"rAtE." – a rate
"SP.EF." – special effects
"SP. FU." – special functions
"rE.bG." – a red LEDs saturation - background
"Gr.bG." – a green LEDs saturation – background
"bL.bG." – a blue LEDs saturation – background
"Vh.bG." – a white LEDs saturation – background
"Zo.EF." – zone effects
"Zo.SP." – a zone effects speed
"F.tin." – fade time
"S.tin" – step time
"COPY". – this item duplicates current prog. step to the next prog. step.
Note: Items in this menu depend on selected DMX mode.
3. Use the UP/DOWN buttons to set a DMX value of the channel and then press the ENTER button.
4. Use the UP/DOWN buttons to select next channel and press the ENTER button.
5. After having set all channels in the current program step, press the ESCAPE button to go one menu level
back and select another program step.

4.7 Special functions

rdM.L --- Code.This menu item shows the first part of the RDM identification code.
rdM.H --- Code. This menu item shows the second part of the RDM identification code.
ViFi --- Wireless DMX. The menu serves for reading of the wireless operation status (only for Wireless DMX
version).
50 --- Wireless DMX signal intensity. The menu item shows level of received signal in %. If the fixture is not
linked to the transmitter, "niSS" is displayed.
UnLI --- Wireless DMX unlink. The item serves for unlinking the fixture from transmitter.
ColorStrobe IP
14