Manual Mode - Robe ColorStrobe IP User Manual

DiSP. --- Display adjusting. This function allows you to change the display settings.
d.On --- this function allows you to keep the display on or to turn off automatically 2 minutes
d.Int. --- select this function to adjust the display intensity (6-min.,100-max.).
turn ---
C.CL.n. --- Colour calibration mode
--- Colour mixing mode - This item allows switching into RGBW or CMY mode. In the CMY mode, white
C.MI.n.
channels are not active.
diM.c. --- Dimmer curve. Use the menuitem to set desired dimmer curve:
SqL --- Square law
Lin --- Linear
VhI.c. --- White counting. If this function is On, red, green and blue LEDs proportionally light when an intensity of a
white channel is increasing. If you want to light with white LEDs only, this function has to be set off.
Fo.bE. --- Foreground and background relation
SouEr --- Foreground overwrites Background
And --- Foreground and Background (standard behaviour of the fixture)
APLuS --- Foreground + Background
tnP.u. --- Temperature unit. Use this menu in order to display the fixture temperatures in desired units: °C or °F.
In.Po. --- Init effect positions. Use this function to set all effects to the desired positions to which they will move
after switching the fixture on (if DMX is not receiving).
dF.SE. --- Default Settings .The menu item sets all fixture parameters to the default (factory) values.

4.4 Manual mode

Use this menu to control all channels via buttons of the control board.
Items in this menu depend on selected DMX mode.
To control fixture channels.
1. Press the ENTER button.
2. Use the UP/DOWN buttons to select desired effect (channel).
List of control channels:
"rE.Fo" – a red LEDs saturation coarse- foreground
"rE.F.F" – a red LEDs saturation fine-foreground
"Gr.Fo" – a green LEDs saturation coarse -foreground
"Gr.F.F" – a green LEDs saturation fine-foreground
"bL.Fo" – a blue LEDs saturation coarse -foreground
"bL.F.F" – a blue LEDs saturation fine-foreground
"Uh.Fo" – a white LEDs saturation coarse -foreground
"Uh.F.F" – a white LEDs saturation fine-foreground
"Cto" – a colour temperature correction
"Vir.C" – a virtual colour
"di.Fo" – a dimmer coarse -foreground
"di.F.F" – a dimmer fine -foreground
after last pressing any button on the control panel.
select this function to rotate menu 180 degrees from current orientation
If the function is on, white colours (2700K-8000K) are more uniform.
.
ColorStrobe IP
12
.