8-12. Miscellaneous Settings
A variety of changes can be made to settings, depending on the indoor unit being used.
Operation mode indicator, time display (24 hour, AM/PM), Heat Max Temp
• (These settings are saved in nonvolatile memory in the remote controller, so even when its batteries are changed,
the settings do not have to be made again.)
• First check the display of the remote controller when the unit is stopped and then make any desired settings.
How to Operate
• While holding down the buttons below, every time
• Whatever is being displayed when you release
Setting Item
Remote controller
operation mode
display setting
when
is pressed
Clock display
setting
Max possible
temperature
setting in the
Heat mode
8
AMP Air Conditioning
Operation Button
Heat Pump
(with Auto)
Press
Heat Pump
(without Auto)
while pressing
Dedicated air
conditioner
24 Hour
Press
while pressing
AM/PM
Maximum heating
Press
temperature range is
while pressing
26 °C – 30 °C
is pressed the remote controller's display changes.
is set.
Setting Content
Remote Controller Display
8-12
www.ampair.co.uk | sales@ampair.co.uk