Emergency Operation - Panasonic S-200PE2E5 Technical Data & Service Manual

2. Wireless Remote Controller

8-11. Emergency Operation

Use [Emergency Operation]
When the remote controller's batteries have failed.
When the remote controller is broken.
When the remote controller is lost.
CZ-RWSU3
Start : press [Emergency Operation]
If the indoor temperature is 24 °C or greater when the unit starts running, it will act as a cooling mode.
If the indoor temperature is less than 24 °C when the unit starts running, it will act as a heating mode.
Stop : press [Emergency Operation]
CZ-RWSU3
Start/Stop
CZ-RWSU3 is of receivers (inside indoor unit).
NOTE
The Test Run/On and Test/On switches are for use when the unit is installed and test run. It is not for normal use.
If the [Normal/Stop ALL] switch is on Stop ALL, the unit cannot receive signals from the remote controller .
CZ-RWSC3
Start : press [Emergency Operation]
If the indoor temperature is 24 °C or greater when the unit starts running, it will act as a cooler.
If the indoor temperature is less than 24 °C when the unit starts running, it will act as a heater.
Stop : press [Emergency Operation]
AMP Air Conditioning
in the following situations when there is an urgent need.
of the receiver.
of the receiver again.
of the receiver.
of the receiver again.
CZ-RWSC3
Start/Stop
8-11
www.ampair.co.uk | sales@ampair.co.uk
Control of 2WAY SYSTEM
8