AXIS T8341 PIR Motion Sensor
How to program the Z-Wave device
•
COMMAND_CLASS_NOTIFICATION_V4
•
COMMAND_CLASS_CONFIGURATION
Wake up command class
After the detector has been included into a Z-Wave network it will go to sleep, but it will send a wake-up notification command
to the controller periodically at a preset period . The motion detector will stay awake for at least 10 seconds and then go back to
sleep to conserve battery life.
The time interval between wake up notification commands can be set in the wake up command class based on the range values below:
Minimum wake up interval
Maximum wake up interval
Default wake up interval
Wake up interval step seconds
600s (10 minutes)
86400s (1 day)
14400s (4 hours)
600s (10 minutes)
9