The device is Z-Wave® enabled and fully compatible with any Z-Wave enabled network. The device can be set up in a Z-Wave network to communicate directly with other end devices such as lighting controllers, or to report directly to a Z-Wave controller like the AXIS M5065 PTZ Network Camera.
AXIS T8342 Door/Window Sensor How to add a device to a Z-Wave Network How to add a device to a Z-Wave Network Auto inclusion The detector supports the auto inclusion feature where it will automatically enter Inclusion mode when first powered up.
AXIS T8342 Door/Window Sensor How to test the Z-Wave device How to test the Z-Wave device • Remove the battery cover with the tamper switch not being pressed on the detector (test mode) • Separate the magnet from the detector. The detector should then flash.
This has the effect that when the detector triggers, all devices associated with detector will be operated. Note Association-group support can vary among Z-Wave Controllers. The AXIS M5065 supports Z-Wave Association Group 1. Group 1 commands: •...
Page 8
AXIS T8342 Door/Window Sensor How to program the Z-Wave device Group Profile Command Class & Command Group Name (UTF-8) (List) N bytes General Notification Report Lifeline Device Reset Locally Notification Control Basic Set PIR Control Notification Event Type Event Event Parameters...
Page 9
AXIS T8342 Door/Window Sensor How to program the Z-Wave device • COMMAND_CLASS_WAKE_UP_V2 • COMMAND_CLASS_NOTIFICATION_V4 Wake up command class After the detector has been included into a Z-Wave network it will go to sleep, but it will send a wake-up notification command to the controller periodically at a preset period .
AXIS T8342 Door/Window Sensor Troubleshooting Troubleshooting The table below explains the status in the Z-Wave controller as well as the LED indication on the device. Description LED indication Action/Status No node ID. The Z-Wave controller could not find the device and did not 2-second on, 2-second off for 2 provide a node ID.
AXIS T8342 Door/Window Sensor Specifications Specifications To find the latest version of the product’s datasheet, go to the product page on axis.com and locate Support & Documentation. Specifications Battery CR2450 3.0V Lithium Battery x 2 Battery life 1 year* Range...