Techkon SpectroDens Manual page 54

Average values
From a series of single measurements Average values can be calculated and
displayed. This function may be used when the surface of the sample has no even dis-
tribution of color. In this case measurements at different locations can be made which
will be calculated to one significant mean value.
Page 54 Manual TECHKON SpectroDens Chapter 2 – Measurement functions
By selecting the "soft key" with the average
symbol a pop-up window will appear where
Average measurement can be set, started
and canceled.
Here the number of single measurements
which will be calculated to one average value
is set. The maximum number of single mea-
surements is 9.
Now activate Start Average measure-
ment.
In the central window there is shown how
many single measurements have been taken.
After the last single measurement has been
taken, the resulting average value will be
displayed and the procedure can start again
from the beginning.
Activating the menu item Stop Average
measurement you quit this measurement
mode.