Zebex Z-3191BT Quick Connection Manual
Wireless handheld gun type scanner
Hide thumbs
Also See for Z-3191BT:
- User manual (98 pages) ,
- Quick connection manual (2 pages) ,
- Quick manual (2 pages)
Advertisement
Quick Links
Setting up the scanner
ASCII Code 39 Table
Getting Started
Follow the steps to enable the scanner SPP Slave mode.
SPP Slave Mode
In this mode, the scanner connects to the host /PC via wireless connection and
performs like there's a serial connection. In SPP Slave mode, the scanner is
discoverable from a remote device and it can request the scanner for connection.
To enable SPP slave mode:
1. Power on the scanner and scan the "Start of Configuration" label.
Start of Configuration
2. Scan the "SPP Slave mode" label.
Scanner SPP Slave enable
3. Scan the "End of Configuration" label.
End Of Configuration
Wireless Handheld Gun Type Scanner
Quick Connection Guide
Version 1.00
Advertisement
Related Manuals for Zebex Z-3191BT
Summary of Contents for Zebex Z-3191BT
- Page 1 Setting up the scanner ASCII Code 39 Table Getting Started Wireless Handheld Gun Type Scanner Follow the steps to enable the scanner SPP Slave mode. SPP Slave Mode In this mode, the scanner connects to the host /PC via wireless connection and performs like there’s a serial connection.
- Page 2 Connect to Windows XP via SPP Slave Mode Connecting to PC Step. 4 Please follow the below instructions carefully to pair the scanner with Tick "My device is set up and ready to be found." then select "Next" to your PC. discover surrounding Bluetooth devices.