Mounting; Orientation; Truss Installation - Chauvet Vivid 4 X4 User Manual

Mounting

4. Mounting

Orientation

Each Vivid 4 is constructed of a die-cast magnesium alloy. This ensures each panel is stable and easy to
install. Each panel also has a convenient built-in handle located on the top and bottom, backside of the
panel along with two alignment conicals on the top. This combination enables you to easily pick up and
securely hold each panel while mounting and working with the panels.
The Vivid 4 can be assembled to provide any number of modular designs. The panels on the top can be
securely hung from a truss or other stable surface. Always hang in a safe position with adequate space for
ventilation, configuration, and maintenance.
Chauvet recommends following the general guidelines below.
• When selecting an installation location, consider ease of access for operation and routine
maintenance.
• Make sure to hang away from any flammable material, as indicated in the
• Never mount in places where rain, extreme temperature changes, or restricted ventilation may
affect it.
• Make sure that the structure and attachment points to which you are hanging the panels can support
the weight.
• Make sure that all load-bearing hardware used can support the weight.
• See the Technical Specifications

Truss Installation

Refer to the following diagram for truss installation. Chauvet offers the F-Series Rig Bar (sold separately)
specifically designed for hanging the panels.
Attach to Truss Using Optional F-Series Rig Bar
The illustrations above are examples only. Please refer to all applicable local codes
and regulations for the proper installation of the product.
Vivid 4 X4 User Manual Rev. 1
for the weight requirement of each Vivid 4.
Safety Notes section.
8