Initial Set Up - Human Design Medical Z1 Auto System User Manual

Initial Set Up

Unpacking the Z1 Auto Box
You will need to perform a few minor setup steps before using your new Z1 . The instructions
below will guide you through the setup process . Some of the steps outlined below may have
been performed by your healthcare provider prior to delivering the Z1 to you . If you have any
questions or problems as you go through the setup process, please call Human Design Medical
Customer Service at 1-855-436-8729 [1-855-HDMUSA9] for assistance . Human Design Medical
wants your user experience with the Z1 to be trouble and frustration free .
1 . Carefully remove the contents of the box .
2 . Some of the Z1 components have their own packaging material . Remove this material
carefully . Avoid using anything sharp when opening the packaging .
3 . Carefully inspect all contents against the package contents list on page 8 to assure
all components are present . Keep in mind that your healthcare provider might have
completed some of the setup steps prior to delivery, so if a component appears to
be missing, check to see if it has already been connected . Also inspect all contents
to ensure there is no obvious or visible damage or defects . If you have any concerns
or questions, contact Human Design Medical Customer Service at 1-855-436-8729
[1-855-HDMUSA9], or your service or healthcare provider before use .
4 . Place all the components in an area where you can easily access the Z1 for set up and
programming .
WARNING: Do not use this product if you have any concerns about the
condition of the contents or if there are any missing parts .
The contents of the Z1 box includes the following:
Z1 Auto System
Slim-style
CPAP tube
10
USB Cable
Power Cord
Z1 Auto
AC DC Adapter
Filter
Tube Adapter