Getting To Know Your Z1 Auto System - Human Design Medical Z1 Auto System User Manual

• In the event that the Battery leaks and the fluid gets into one's eye, do not rub the eye. Rinse
well with water and immediately seek medical care. If left untreated the battery fluid could
cause damage to the eye .
• Only charge the Battery with the supplied Human Design Medical PowerShell and the
supplied Human Design Medical Power Supply . Do not use any other removeable battery
charger, AC adapter, or other device to charge the Battery .
• Do not attach the Battery directly to a vehicle cigarette lighter or to the Power Supply plug .
• Do not continue charging the Battery if it does not recharge within the specified charging
time . Doing so may cause the Battery to become hot, rupture or ignite .
• Remove the Battery from the PowerShell if the Z1 is not likely to be used for some time . Do
not use the Battery to power any device other than the Z1 .
• Only use or charge the Battery within the operating temperature, humidity and altitude
conditions specified in the Technical Specifications section of this User Guide .
• Only store or transport the Battery within the storage and transport temperature and
humidity conditions specified in the Technical Specifications section of this User Guide .
CAUTION:
• When the Battery is worn out, insulate the terminals with adhesive tape or similar
materials before disposal .

Getting to Know Your Z1 Auto System

Package Contents
Z1 Auto Base Model
Z1 Auto CPAP Device
Power Supply & Cord
Custom USB A to Micro B Cable
Custom CPAP Tube Adapter
48" Slim Style CPAP Tube
End Cap
Filter (2- 1 installed in Z1, 1 in box)
Heat / Moisture Exchanger (HME)
Z1 Auto Getting Started Guide
Z1 Auto User Guide
The Z1 Auto Unplugged contains both the Z1 Auto Base Model and the PowerShell Module.
8
PowerShell Module
Overnight Battery
Battery Shuttle
PowerShell
PowerShell Getting Started Guide