Human Design Medical Z1 Auto System User Manual page 6

Z1 and its accessories before cleaning (and clean only as instructed in this User Guide)
and make sure your Z1 and its accessories are dry before plugging back in .
• Before use, make sure the power cord and plug are in good condition and that the
cord is not damaged .
• Do not use bleach, chlorine, alcohol, or aromatic-based solutions, moisturizing or
antibacterial soaps or scented oils to clean your Z1, Power Supply, PowerShell or
Battery . These solutions may create a shock hazard, cause damage and reduce the life
of these items .
• Explosion Hazard — Do not use or store your Z1, Power Supply, PowerShell or
Battery in the vicinity of flammable anesthetics or oxygen.
• Do not use your Z1 near toxic or harmful vapors .
• Do not drop your Z1 or any of its accessories or expose it to any crushing forces .
Should your Z1 be dropped and fail to operate properly, contact the Human Design
Medical Service Center at 1-855-436-8729 [1-855-HDMUSA9] before using the Z1 for
treatment .
• Do not insert any object into any tubing or opening of your Z1 except as described in
this User Guide .
• Do not operate your Z1 in any area which may block its air intake . Blocking the CPAP
Tube and/or air inlet of your Z1 while in operation could lead to overheating of the Z1 .
• If you put the Z1 on the floor, make sure the area is free from dust and clear of
bedding, clothes or other objects that could block the air inlet or cover the Power
Supply unit .
• Only store or transport the Z1 and accessories within the storage and transport
temperature, humidity and altitude conditions specified in the Technical
Specifications section of this User Guide .
• Do not operate your Z1, Power Supply, PowerShell or Battery in an area which may
cause overheating .
• Do not cover the Power Supply, PowerShell or Battery with any object or material
which would cause them to overheat .
• Keep the power cord, Power Supply, Battery and Z1 away from hot or flammable
surfaces, gases or materials .
• Do not open your Z1 or tamper with its accessories . There are no user serviceable
parts inside . Repairs and servicing should only be performed by an authorized Human
Design Medical service agent .
• Only power the Z1 with the Human Design Medical Power Supply (AC-to-DC power
adapter, HD60-6010) or the optional Human Design Medical PowerShell with Human
Design Medical Battery . Do not use any other AC adapters, batteries, or other power
sources to power the Z1 . Do not use the Human Design Medical Power Supply,
PowerShell or Battery to power any device other than the Z1 .
5