Z1 Auto Cpap Device - Human Design Medical Z1 Auto System User Manual

Z1 Auto CPAP Device

The Z1 supplies continuous positive airway pressure and can be programmed to fit the patient's
prescriptive needs .
Power Supply (AC to DC Power Adapter)
The Power Supply provides power to the Z1 . It takes AC power (voltage ranging from 100-240
volts) from a wall outlet and converts it to DC voltage to power the Z1 . The Power Supply can be
used with international power sources provided the appropriate plug adapter is used .
Tube Adapter
The Tube Adapter attaches the CPAP Tube to the Z1 .
CPAP Tube
The Z1 System is provided with a 4 ft slim style CPAP Tube . The CPAP Tube connects the Z1 to your
mask . Always consult with your physician or healthcare provider regarding the selection of tubing
for your treatment . Follow the instructions provided with the tubing . Replacement tubing can be
purchased from Human Design Medical at 1-855-436-8724 [1-855-HDMUSA4] or online at www .
hdmusa . c om .
End Cap
The End Cap attaches to the air intake end of the Z1 and houses the Filter .
Filter
The Z1 uses a specially designed filter . The material has been specifically chosen for the Z1 and
has been designed to be much larger than other CPAP filters . The unique shape of the filter fits
into the End Cap of the Z1, which was designed to allow for more effective filter surface area .
For proper operation of the Z1, the Filter should be replaced monthly or more often if necessary .
USB Micro Cable
The USB Cable allows the Z1 to communicate with a computer to collect and view user data .
PowerShell (Optional Accessory)
The PowerShell houses both the Z1 and the Battery which allows temporary usage of the Z1
without the Power Supply . It can be purchased at 1-855-436-8724 [1-855-HDMUSA4] or online at
www . h dmusa . c om .
NOTE: Replacement parts, supplies and accessories can be purchased from
Human Design Medical at 1-855-436-8724 [1-855-HDMUSA4] or online at
www . h dmusa . c om .
9