Welcome To Your Z1 Auto System - Human Design Medical Z1 Auto System User Manual

Welcome to Your Z1 Auto System

Thank you for choosing the Z1 Auto System from Human Design Medical– designed and
engineered in the USA with you in mind .
The Z1 is specially designed with these features:
• Z-Breathe® – the Z1 automatically reduces the air pressure in the mask to relieve
pressure when you exhale and to level out the pressure differences in your natural
breathing pattern .
• Leak Compensation – the Z1 automatically compensates for minor air leakage
helping ensure the proper treatment pressure is maintained .
• Auto Altitude Adjustment – the Z1 adjusts to altitudes up to 8000 ft above sea level.
• Air Travel – The Z1 adjusts to an airplane's cabin pressure and is approved for use on
airplanes .
• Upgradable Operating System– the Z1 firmware and software can be easily updated
via the USB Cable and your computer .
This User Guide will help you take advantage of the features and capabilities of this amazing
portable, auto-adjusting CPAP device. Please read this User Guide carefully before using your Z1 .
Owner/User Responsibility
The owner/user of the Z1 Auto System is responsible for reading and understanding this User
Guide. The user is responsible for any injury or damage that results from:
• Operation of the Z1 other than in accordance with the operating instructions
contained in the User Guide supplied .
• Unauthorized maintenance or modifications to the device or attached accessories.
Healthcare Provider Responsibility
Your healthcare provider is responsible for explaining contraindications and instructions for use to
the patients/users .
Replacement Parts and Supplies
Use only genuine Z1 replacement filters, parts and supplies . Replacement filters, parts and
supplies can be purchased from Human Design Medical at 1-855-436-8724 [1-855-HDMUSA4]
or online at www . h dmusa . c om . Use of unauthorized filters, parts or replacement supplies can
damage the device and void the warranty .
2