4.1.3 Models with RJ11 connector
An RJ11 6-way connector, as shown and described below, serves as a means of supplying DC power to
the modem.
The power supply voltage (VCC) required by the modem is in the range of 7 to 50VDC. We recommend
a 12V DC power supply. The power supply has to be a single voltage source capable of providing a
current peak during an active transmission. The uplink burst causes strong ripples (drop) on the power
lines.
MTX-IoT devices are shipped to automatically switch on only with supply between PIN 1 and PIN 6.
Pin
Signal
1
VIN
2
TAMP-
3
NC
4
NC
5
TAMP+
6
GND
www.mtxm2m.com
Direction
Limits
Input
6.5-40VDC
Output
Vmax: VIN
Input
0-VIN
Input
2017/07 v1.2
MTX M2M® by MATRIX ELECTRONICA S.L.U
MTX-xG-JAVA-IoT Family
Description
Positive power input
ULP negative wake-up input (see
Not connected
Not connected
ULP positive wake-up input (see
Negative power (ground)
section
4.13)
section
4.13)
/
Page 49
105