Table of Contents
Advertisement
8. Safety and product care
Please read the information in this section and the information in "Installation of the Modem",
before starting your integration work!
8.1 Safety instructions
PLEASE READ THESE SAFETY INSTRUCTIONS AND KEEP A COPY OF THEM
•
Always ensure that use of the modem is permitted. The modem may present a hazard if used
in proximity to personal electronic medical devices. As a rule, the modem must not be used in
hospitals, airports or planes.
•
Never use the modem at a gas station, refueling point, blasting area or in any other
environment where explosives may be present.
•
Operating the modem close to other electronic devices, such as antennas, television sets, and
radios may cause electromagnetic interference.
•
This product is intended to be used with the antenna or other radiating element at least 20cm
away from any part of the human body. In applications where this rule cannot be applied, the
application designer is responsible for providing the SAR measurement test report and
declaration.
•
You are responsible for observing your country's safety standards, and where applicable, the
relevant wiring rules.
8.2 General precautions
The MTX-IoT modem as a standalone item is designed for indoor use only. For outdoor use it must be
integrated into a weatherproof enclosure. Do not exceed the environmental and electrical limits as
specified in "Technical Data".
•
Avoid exposing the modem to lighted cigarettes, naked flames or to extreme hot or cold
temperatures.
•
Never try to dismantle the modem yourself. There are no components inside the modem that
can be serviced by the user. If you attempt to dismantle the modem, you may invalidate the
warranty.
•
The MTX-IoT modem must not be installed nor located in areas where the surface temperature
of the plastic case could exceed 85°C.
www.mtxm2m.com
2017/07 v1.2
MTX M2M® by MATRIX ELECTRONICA S.L.U
MTX-xG-JAVA-IoT Family
/
Page 82
105
Advertisement
Table of Contents
