Table of Contents
Advertisement
12.2
SAR requirements specific to portable mobiles
Mobile phones, PDAs or other portable transmitters and receivers incorporating a GSM module must
be in accordance with the guidelines for human exposure to radio frequency energy. This requires the
Specific Absorption Rate (SAR) of portable EHS6 based applications to be evaluated and approved for
compliance with national and/or international regulations.
Since the SAR value varies significantly with the individual product design, manufacturers are advised
to submit their product for approval if designed for portable use. For European markets the relevant
directives are mentioned below. It is the responsibility of the manufacturer of the final product to
verify whether or not further standards, recommendations or directives are in force outside these
areas.
Products intended for sale in US markets
EN 59005/ANSI C95.1: Considerations for evaluation of human exposure to Electromagnetic Fields
(EMFs) from Mobile Telecommunication Equipment (MTE) in the frequency range 30MHz – 6GHz
Products intended for sale in European markets
EN 50360: Product standard to demonstrate the compliance of mobile phones with the basic
restrictions related to human exposure to electromagnetic fields (300MHz - 3GHz)
Please note that SAR requirements are specific only for portable devices and not for mobile devices
as defined below:
•
Portable device:
A portable device is defined as a transmitting device designed to be used so that the
radiating structure(s) of the device is/are within 20 centimeters of the user´s body.
•
Mobile device:
A mobile device is defined as a transmitting device designed to be used in other than fixed
locations and to generally be used in such a way that a separation distance of at least 20
centimeters is normally maintained between the transmitter's radiating structure(s) and the
user's body or that of nearby persons. In this context, the term "fixed location" means that
the device is physically secured at one location and cannot be easily moved to another
location.
12.3
SELV requirements
The power supply connected to the MTX-IoT modem shall be in compliance with the SELV
requirements defined in EN 60950-1.
www.mtxm2m.com
2017/07 v1.2
MTX M2M® by MATRIX ELECTRONICA S.L.U
MTX-xG-JAVA-IoT Family
/
Page 94
105
Advertisement
Table of Contents
