MTX -3G-JAVA-IoT User Manual page 22

RS232 (4-wire) Adjustable baud rates: 1200bps to 921600bps
Autobauding: 1200 to 230400bps
Supports RTS/CTS hardware flow control
Multiplex ability according to GSM 07.10 Multiplexer Protocol
RS485 Adjustable baud rates: 1200bps to 921600bps
Autobauding: 1200 to 230400bps
Half-duplex
Opto I/O 2x inputs and 2x outputs optoisolated
ADC 2x analog inputs, supporting 0-50V modes (other modes available under request)
Count input 1x pulse count input
1-Wire 1-Wire (master) bus for EEPROM, Temperature sensors, etc.
Data rate up to 1Mbps
CAN
GIFT/ICT compliant
Status Bi-color LED to indicate network connectivity status.
UICC interface Supported chip cards: UICC/SIM/USIM 3V, 1.8V
Antenna 50 Ohms. GSM/UMTS main antenna
Power on/off, Reset
Power on/off Automatic switch-on at power supply
Switch off by AT command
Switch off by hardware signal TURN_OFF
Automatic switch-off in case of critical temperature or voltage conditions
Software Reset Orderly shutdown and reset by AT command
Hardware Reset Emergency reset by hardware signal TURN_OFF
Special features
Antenna SAIC (Single Antenna Interference Cancellation) / DARP (Downlink Advanced Receiver Performance)
Rx Diversity (receiver type 3i – 64-QAM) / MIMO
www.mtxm2m.com 2017/07 v1.2
MTX M2M® by MATRIX ELECTRONICA S.L.U
MTX-xG-JAVA-IoT Family
/
Page 22 105