System Commissioning - Huawei iSiteC BTS3601C Installation Manual

Installation Manual
iSiteC BTS3601C CDMA Base Station
4.1 Modes of System Commissioning
4.1.1 Local Commissioning
Local commissioning is performed through BTS3601C local maintenance console.
The user can log in to the BTS3601C in the Telnet mode, and commission the
BTS3601C objects with Man-Machine-Language (MML) commands.
Please refer to the module of "Maintenance Console" in User Manual for details of
commissioning commands.
4.1.2 Remote Commissioning
In the remote commissioning mode, the user can input the commissioning command
at the OMC Client. After receiving the command, BAM server will process it and send
it to the BTS3601C. When the response returns from the BTS3601C, BAM server will
record the operation result (success, failure, timeout, abnormality, etc.) and send the
returned operation result in a certain report format to the Client.
For specific operations, please refer to cBSC Operation Manual.
4.2 Power-on Operation of Software
After the BTS3601C is powered on, the software of various boards will conduct
self-test and necessary initialization.
After the system operation becomes stable, MBPB will acquire the basic configuration
parameters to set up the Operation & Maintenance Link (OML) for the BTS3601C
(The protocol involved is BOOTP, a standard protocol in TCP/IP protocol family, which
can be used to obtain IP automatically).
MBPB will also judge whether there are correct configuration data in the BTS3601C
Flash Memory. If there are correct configuration data, MBPB will directly send the
data to each board for configuration. If there is no correct data, MBPB will request the
data from OMC, and send it to the BTS3601C boards for configuration.
The following section briefs the startup and operation of BTS3601C.

4 System Commissioning

Software Installation & System Commissioning
4-1
0错 误 表 格 结 果 无 效