Huawei iSiteC BTS3601C Installation Manual page 21

Cdma base station; software installation & system commissioning

Hide thumbs Also See for iSiteC BTS3601C:

Table of Contents

Installation Manual

iSiteC BTS3601C CDMA Base Station

[BTS Name]: Input the name of BTS whose software is to be activated (this entry may

be omitted);

[BTS ID]: Input the ID of the BTS whose software is to be activated;

[Object Type]: Select the type of the object whose software is to be activated;

[Software Type]: Select the type of the software to be activated;

[Software Version]: Input the version No. of the software to be activated;

[Board ID]: Select the ID of the corresponding board.

Click

board software/data.

Note:

The activation of the software can be conducted automatically by the system if the [Software Activation

Mode] is set as "Automatic" during the setup to download the software. 　

VI. Uploading of BTS3601C configuration data

Run the remote maintenance console software (AirBridge cBSS Client), and select

BTS Management in the command tree.

Select Mini-BTS Management\Mini-BTS Loading Management\Upload BTS Data

Operation (MICRO>ULD BTSCFG).

Click

following:

[BTS Name]: Input the name of BTS whose configuration data is to be uploaded (this

entry may be omitted);

[BTS ID]: Input the ID of the BTS whose data is to be uploaded;

[Object Type]: Select the type of the object whose data is to be uploaded.

Click

corresponding BTS3601C configuration data.

, the shortcut i c on of Execute Command, to activate the corresponding

, the shortcut icon of command Create Input Interface, and input the

, the shortcut icon of command Execute Command, to upload the

Software Installation & System Commissioning

3-6

0错误

表格结果无效

Table of Contents