Installation Manual
iSiteC BTS3601C CDMA Base Station
Click <OK>, and the system should be restarted to make the Client software valid.
Figure 2-6 End of the installation
That is the end of the installation of BTS3601C Client software.
&
Note:
The above described installation procedure is the one in normal situation. If abnormality occurs at any
installation procedure, please follow the system prompts.
After the installation, click [Start/Program/Airbridge cBSS cdma 1X Administration
System/ AirBridge cBSS Client] to start the Client software.
The operation interface is shown in Figure 2-7.
Software Installation & System Commissioning
2-7
0错 误
表 格 结 果 无 效