Huawei iSiteC BTS3601C Installation Manual page 30

Installation Manual
iSiteC BTS3601C CDMA Base Station
Click
[BTS Name]: Input the name of the BTS (this entry may be omitted);
l
[BTS ID]: Select the ID of the BTS to be queried;
l
[Board Type]: Select the type of the BTS board to be queried;
l
[Board ID]: Select the ID of the BTS MTRB to be queried (when [Board Type] is
l
selected to be MBPB, this parameter will not appear).
Click
BTS board version information in the maintenance window.
3) Resetting BTS3601C boards
Boards can be reset through the BTS3601C remote/local O&M console. OMU issues
the board resetting command to the corresponding board. In receipt of the command,
the board will reset itself, send the reset report message to and wait for the
initialization data from OMU.
Board reset will affect the system operation status. It is recommended that the user
use it prudently.
The method to reset BTS3601C boards on the remote BTS3601C maintenance
console is as follows:
Run the remote maintenance console software (AirBridge cBSS Client), and select
BTS Management in the command tree.
Select Mini-BTS Management\Mini-BTS Equipment Management\Reset Mini-BTS
Board (MICRO>RST BTSBRD).
Click
following:
[BTS Name]: Input the name of the BTS (this entry may be omitted);
l
[BTS ID]: Select the ID of the BTS to be managed.
l
[Board Type]: Select the type of the BTS board to be reset.
l
[Board ID]: Select the ID of the BTS MTRB to be reset (when [Board Type] is
l
selected to be MBPB, this parameter will not appear);
[Level of resetting]: Select the level of the reset.
l
Click
board.
II. Tracing management
1) Starting BTS3601C resource tracing
, the shortcut icon of Create Input Interface, and input the following:
, the shortcut icon of Execute command , to display the query result of
, the shortcut icon of command Create Input Interface, and input the
, the shortcut icon of Execute command, to reset the corresponding BTS
Software Installation & System Commissioning
4-6
0错 误 表 格 结 果 无 效