Ametek ABCE702-11R Manual page 13

Security II Rackmount Quick Start Guide
4.
Connect battery
connector.
*
Battery connectors may
be partially hidden on
the side of the battery.
5.
Put they metal battery
cover and the front
cover back on and
remove the yellow
warning label.
IMPORTANT:
Wait 15 seconds after inserting the battery plug(s) before pressing the ON switch on the UPM front panel.
If you ship the UPM to another location at a later date, disconnect the battery plug(s) first to ensure that safety is maintained during shipment.
6.
Turn UPM on by pressing
ON button for 3 seconds
A01-00104 Rev A
*The 2.2 & 3KVA units connect 2 batteries
3 sec.
13