Sony HDVF-C30W Maintenance Manual page 14

1-7-2. Replacing the Protection Glass
Parts to be prepared in addition to the protection glass:
. Glass cushion, 1 piece :
. Radiation sheet, 2 pieces : 3-776-623-xx
Removal
1. Push the RELEASE knob in the direction of the arrow
A to release the lock and remove the viewfinder barrel
by rotating it in the direction of the arrow B.
Fig. 2
Red marks
2. Remove the viewfinder main unit and then remove the
LCD panel.
(Perform steps 1 to 3, 5 and 8 of "1-7-1. Replacing the
LCD Panel.")
3. Peel off the two radiation sheets.
4. Peel off the protection glass from glass cushion to
remove it.
5. Peel off the glass cushion from the front chassis and
wipe the attaching surface of the glass cushion with
alcohol.
1-8 (E)
3-776-618-xx
B
Viewfinder barrel
A
RELEASE knob
Fig. 1
Installation
6. Peel off the protection sheet from the new glass
cushion and attach the new glass cushion to the
attaching surface.
Precaution for attaching the glass cushion
. Attach the glass cushion so that any portion of the
glass cushion should not protrude from the attaching
surface.
. Attach the glass cushion with care so that any
wrinkle should not be generated.
7. Peel off the protection sheet form the surface of the glass
cushion attached, and install the new protection glass.
8. Attach the two radiation sheets to the positions as
shown in the illustration.
9. Install the removed parts by reversing the steps of removal.
Protection
sheets
Radiation sheets
Precaution for installation
Align the red marks when installing the viewfinder
barrel. (Fig. 2)
Radiation sheets
Protection glass
Glass cushion
Attaching surface
Front chassis
Align the
radiation
sheets with
the walls.
HDVF-C30W