Sony HDVF-C30W Maintenance Manual page 11

S2 Switch
Ref. No. Description
S2-1, 2 Selects whether to enlarge the range of color temperature
adjustment range or not on the y-axis of the chromaticity diagram
with the use of the switch S1-6 to S1-8.
S2-1
(WB_ _ _ _ _ Y)
OFF
ON
OFF
ON
n
The switches S2-1 and S2-2 should be adjusted in combination
with the switches S1-6 through S1-8.
y
B
S2-3 Selects direction of the display scanning forcibly from the right or the left.
OFF : Normal direction (The switch S2 on the VR-208 board is enabled.)
ON : Direction of scanning can be selected forcibly (The switch S2 on the
VR-208 board is disbled.)
S2-4 TEST SAW waveform output switch
ON : Generates the TEST SAW waveform within viewfinder.
Use the TEST SAW signal to check the video signal system using the
EX-909 board.
HDVF-C30W
S2-2 Chromaticity (y-axis direction)
(WB+ + + + + Y)
Factory default setting (As shown in 1 on the
OFF
following diagram)
OFF Chromaticity is adjusted toward the minus
(Magenta) direction. (As shown in 2 on the
following diagram)
ON Chromaticity is adjusted toward the plus (Green)
direction. (As shown in 3 on the following diagram)
ON _
G
3
1
R
2
x
Factory setting
All OFF
ON
1 2 3 4
1-5 (E)