Sony HDVF-C30W Maintenance Manual page 13

4. Disconnect the harness from the connector (CN2) on
the RE-208 board.
5. Disconnect the harness from the connector (CN7) on
the PR-267 board.
6. Remove the three screws (M2 x 5) and remove the
RE-208 board from the PR-267 board.
7. Remove the four screws (PS2 x 4) and remove the
board-to-board connector from the PR-267 board.
Board-to-board
connectors
PS2 x 4
PS2 x 4
CN2
M2 x 5
RE-208 board
HDVF-C30W
PR-267
board
CN7
8. Remove the three screws (PS2 x 4) and remove the
LCD panel.
LCD panel
PS2 x 4
PS2 x 4
9. Install the new LCD panel.
Precaution for installation
When installing the new LCD panel, be careful not to
attach dust or fingerprint on the display area of the
LCD panel.
Installation position
Install the LCD panel by pushing it against the sides
"a" and "b" as far as it can go, of the front chassis.
a
Ribs
b
10. Perform the setting of the switches S1 and S2 of the
PR-267 board. (Refer to Section 1-8-1.)
11. Install the removed parts by reversing the steps 1 to 7
of removal.
Precaution for installation
Be sure to insert the connectors to the circuit board
securely for sure connection of the connectors.
Front chassis
VR-280 board
LCD panel
1-7 (E)