Page 4
Beschreibung Description Das SPM-H4TCT setzt vier HDMI- The SPM-H4TCT converts four HDMI Signale in zwei DVB-C oder DVB-T signals into two DVB-C or DVB-T Ausgangskanäle um. Dabei werden output channels. The inputs 1+2 and jeweils die HDMI-Eingänge 1+2 und 3+4 are each modulated into two ad- 3+4 den zwei zwangsbenachbarten jacent output channels.
Page 5
Inbetriebnahme Putting into operation The basic unit is equipped and the Die Bestückung der Grundeinheit und input distribution is set up in accord- der Aufbau der Eingangsverteilung ance with the instructions supplied erfolgt gemäß der dem Grundgerät with the basic unit. beiliegenden Anleitung.
Page 6
Programmierung der Programming procedure Module for the modules Nach der Bestückung der Grundein- After the basic unit has been fitted heit und dem Aufbau der Eingangs- and the input distribution has been verteilung erfolgt zunächst die Pro- set up, the basic unit must be pro- grammierung der Grundeinheit ge- grammed in accordance with the en- mäß...
Page 7
HINWEIS NOTE ACHTUNG ATTENTION Die im Grundgerät benötigte The min. required software ver- min. Softwareversion zur fehler- sion of the base unit for error- freien Programmierung der Mo- free programming, is specified dule, ist auf dem Modul ange- on the module.
4 Firmware-Aktualisierung 4 Firmware Upgrade Die Modul-Firmware kann durch das The module firmware can be updat- Anschließen eines USB-Sticks über ed by connecting a USB stick via the USB-Schnittstelle upgedatet USB interface. Insert USB stick with werden. USB-Stick mit Update-Datei update file H4TCT_Vxxx.bin.
Page 14
4.1. Ausgangsdatenrate und 4.1. Output data rate and program Programmauswahl DVB-T selection DVB-T Die Höhe der max. Ausgangsdaten- The value of the max. output data rate ist abhängig von der maximalen rate depends on the max. DVB-T net DVB-T Netto-Datenrate, den Para- data rate and the parameters modu- metern Modulation, Schutzintervall lation, guard interval and bandwidth...
Page 15
4.2. LED-Anzeige / LED Indication Eingang / Input LED Bedeutung / Definition Das Modul ist betriebsbereit, am Eingang liegt ein Grün leuchtet / gültiges Signal an. / The module is powered and a Green lights up valid signal is present. Rot leuchtet / Kein Signal oder kein gültiges Signal.
Need help?
Do you have a question about the SPM-H4TCT and is the answer not in the manual?
Questions and answers