Punch Process - Sharp MX-FN10 Service Manual

9) Start the pushing plate motor to fold the paper bundle and dis-
charge it.
10) The paper bundle is discharged to the saddle stack tray by the
saddle exit motor.

7. Punch process

1)
2)
3)
4)
5)
MX-FN10 OPERATIONAL DESCRIPTION 5 – 6
When the paper lead edge passes the paper rear edge detec-
tion sensor, the punch horizontal registration motor is booted
to start the horizontal registration.
After starting horizontal registration, when the horizontal regis-
tration sensor detects the side edge, it is shifted by the speci-
fied distance to stop the punch horizontal registration motor.
When the paper rear edge passes the paper rear edge detec-
tion sensor, the transport motor and the transport motor 2 are
stopped to stop paper.
When paper is stopped, the punch motor is booted to punch at
the paper rear edge.
After completion of punching, the transport motor and the
transport motor 2 are booted to start paper transport, execut-
ing the specified after-process.