Installation Tools - TP-Link Jetstream L2 TL-SG5412F Installation Manual

Lightening Protection
Extremely high voltage currents can be produced instantly when lightning occurs and the air in
the electric discharge path can be instantly heated up to 20,000
enough to damage electronic devices, more effective lightning protection measures should be
taken.
Ensure the rack and device are well earthed.
■
Make sure the power socket has a good contact with the ground.
■
Keep a reasonable cabling system and avoid induced lightning.
■
Use the signal SPD (Surge Protective Device) when wiring outdoor.
■
Note: For detailed lightning protection measures, please refer to the Lightning Protection Guide
from the training center of our website http://www.tp-link.com/en/configuration-guides.html.
Installation Site
When installing the device on a rack or a flat workbench, please note the following items:
The rack or workbench is flat and stable, and sturdy enough to support the weight of 5.5kg at least.
■
The rack or workbench has a good ventilation system. The equipment room is well ventilated.
■
The rack is well grounded. Keep the power socket less than 1.5 meters away from the device.
■
2.3

Installation Tools

Phillips screwdriver
■
ESD-preventive wrist wrap
■
Cables
■
Note:
These tools are not provided with our product. If needed, please self purchase them.
2.4 Product Installation
Desktop Installation
■
To install the device on the desktop, please follow the steps:
1. Set the device on a flat surface strong enough to support the entire weight of the device with all
fittings.
2. Remove the adhesive backing papers from the rubber feet.
JetStream L2 Managed Switch
. As this instant current is strong
℃
Installation 08