Voice Specifications - ZyXEL Communications P-3202HN-Ba User Manual

Chapter 23 Product Specifications

Voice Specifications

Note: To take full advantage of the supplementary phone services available through
the IAD's phone port, you may need to subscribe to the services from your VoIP
service provider.
Note: Not all features are supported by all service providers. Consult your service
provider for more information.
Table 75 Voice Features
Call Park and
Pickup
Call Return
Country Code
Do not Disturb
(DnD)
Auto Dial
Phone config
HTTP pincode
232
Call park and pickup lets you put a call on hold (park) and then
continue the call (pickup). The caller must still pay while the call is
parked.
When you park the call, you enter a number of your choice (up to
eight digits), which you must enter again when you pick up the call. If
you do not enter the correct number, you cannot pickup the call. This
means that only someone who knows the number you have chosen
can pick up the call.
You can have more than one call on hold at the same time, but you
must give each call a different number.
With call return, you can place a call to the last number that called
you (either answered or missed). The last incoming call can be
through either SIP or PSTN.
Phone standards and settings differ from one country to another, so
the settings on your IAD must be configured to match those of the
country you are in. The country code feature allows you to do this by
selecting the country from a list rather than changing each setting
manually. Configure the country code feature when you move the IAD
from one country to another.
This feature allows you to set your phone not to ring when someone
calls you. You can set each phone independently using its keypad, or
configure global settings for all phones using the command line
interpreter.
You can set the IAD to automatically dial a specified number
immediately whenever you lift a phone off the hook. Use the Web
Configurator to set the specified number. Use the command line
interpreter to have the IAD wait a specified length of time before
dialing the number.
The phone config table allows you to customize the phone keypad
combinations you use to access certain features on the IAD, such as
call waiting, call return, call forward, etc. The phone config table is
configurable in command interpreter mode.
If your service provider uses an auto provisioning server, you need to
enter a personal identification number (supplied by your service
provider) before you first use the feature.
IAD User's Guide