Table of Contents
Advertisement
Chapter 6 WAN
Table 8 Internet Access Setup (continued)
LABEL
First DNS Server
Second DNS
Server
Third DNS Server
Connection
Nailed-Up
Connection
Connection
Demand
Max Idle Timeout
Apply
Cancel
58
DESCRIPTION
Select FromISP if your ISP dynamically assigns DNS server
information (and the IAD's WAN IP address) and you select Obtain
an IP Address Automatically.
Select UserDefined if you have the IP address of a DNS server. Enter
the DNS server's IP address in the field to the right.
UserDefined, but leave the IP address set to 0.0.0.0, UserDefined
changes to None after you click Apply. If you set a second choice to
UserDefined, and enter the same IP address, the second
UserDefined changes to None after you click Apply.
Select None if you do not want to configure DNS servers. You must
have another DNS server on your LAN, or else the computers must
have their DNS server addresses manually configured. If you do not
configure a DNS server, you must know the IP address of a computer
in order to access it.
Select Nailed-Up Connection when you want your connection up all
the time. The IAD will try to bring up the connection automatically if it
is disconnected.
Select
Connection Demand
all the time and specify an idle time-out in the Max Idle Timeout
field.
Specify an idle time-out in the Max Idle Timeout field when you
select
Connection
Demand. The default setting is 0, which means
the Internet session will not timeout.
Click Apply to save the changes.
Click Cancel to begin configuring this screen afresh.
If you chose
when you don't want the connection up
IAD User's Guide
Advertisement
Table of Contents
