Table of Contents
Advertisement
8.4 The General Screen
Note: If you are configuring the IAD from a computer connected to the wireless LAN
and you change the IAD's SSID or security settings, you will lose your wireless
connection when you press Apply to confirm. You must then change the
wireless settings of your computer to match the IAD's new settings.
Click Network > Wireless LAN to open the General screen.
Figure 23 Network > Wireless LAN > General
The following table describes the labels in this screen.
Table 12 Network > Wireless LAN > General
LABEL
Active
Wireless LAN
Channel
Selection
IAD User's Guide
DESCRIPTION
Click the check box to activate wireless LAN.
Set the operating frequency/channel depending on your particular region.
Select a channel or use Auto to have the IAD automatically determine a
channel to use. If you are having problems with wireless interference,
changing the channel may help. Try to use a channel that is as many
channels away from any channels used by neighboring APs as possible.
The channel number which the IAD is currently using then displays next to
this field.
Chapter 8 Wireless LAN
73
Advertisement
Table of Contents
