Table of Contents
Advertisement
Table 35 SIP Service Provider > Advanced (continued)
LABEL
Min-SE
RTP Port Range
Start Port
End Port
Dialing Interval
Selection
Dialing
Interval
Selection
Apply
Cancel
Basic
IAD User's Guide
DESCRIPTION
Enter the minimum number of seconds the IAD accepts for a session
expiration time when it receives a request to start a SIP session. If the
request has a shorter time, the IAD rejects it.
Enter the listening port number(s) for RTP traffic, if your VoIP service
provider gave you this information. Otherwise, keep the default values.
To enter one port number, enter the port number in the Start Port and
End Port fields.
To enter a range of ports,
•
enter the port number at the beginning of the range in the Start
Port field
•
enter the port number at the end of the range in the End Port field.
Select the number of seconds the IAD waits before placing a dialed call.
Click this to save your changes.
Click this to exit the screen without saving any changes.
Click this to return to the basic SIP Settings screen without saving
your changes.
Chapter 10 Voice
121
Advertisement
Table of Contents
