Table of Contents
Advertisement
3.20
Other functions
The other additional functions on FLEETPC-ARM-300 include:
Tact Switch
SW3 is a tact switch connected directly to iMX6 cpu pin. The GPIO_SW (in below
schematic) is connected to iMX6 pad name: CSI0_VSYNC (ball name N2). Contact us for
the Linux device name, if you plan to use this switch.
Power Output Connector
The CN16 power output connector provides +3.3V, +5V, +12V power to external devices
with limited current (about a few hundred mA for each voltage).
CN16 pin1
FLEETPC-ARM-300 Series
45
Page
Advertisement
Table of Contents
