Connecting The Power Cable For The Chiller Unit - NEC NC1700L Installation Manual

Setting Up Your Projector and Chiller Unit

2-7. Connecting the Power Cable for the Chiller Unit

The power cable is not included with the chiller unit. Refer to "2-7-1. AC Power Work Specifications (Chiller Unit)" (page 65) and
provide the necessary power cable.
WARNING
Carefully read the contents described in this section before connection and connect the cables according to the proper
procedure. Inappropriate handling may cause fatal, serious or other bodily injuries due to fire or electric shock.
CAUTION
• When conducting the power work to connect the power cable, make sure that the main power switch to the projector and
the chiller unit are turned off, and that the AC power supply has been disconnected.
• Contact a certified professional to perform the power work from the building power facilities to the installation location
for the projector and the chiller unit.
• To ensure device safety, use the device only after ensuring it is properly grounded. Due to risk of shock, contact a certi-
fied professional to perform the ground work and ground connections. The ground connection must be established
before supplying the AC power supply.
64