Connecting The Power Cable - NEC NP-NC2402ML User Manual

2. Installation and Connection

2-2. Connecting the Power Cable

Consult your dealer for installing the power cable to the projector.
If AC power is supplied to the projector and light with one power cable (C1 connection), it is not necessary to connect the cable to
the projector power supply.
The power cable is not included with the projector. Use a power cable that meets the standards and power supply voltage of the
country where you are using the projector. Ask your dealer for the power cable to select and purchase.
WARNING
Carefully read the contents described in this section before connection and connect the cables according to the proper proce-
dure. Inappropriate handling may cause fatal, serious or other bodily injuries due to fire or electric shock.
WARNING
• Consult your dealer for installing the power cable to the projector.
DO NOT install the power cable by yourself. Doing so may cause a fire or electric shock.
• Before connecting the power cables, check that the projector power switch and light power switch of the projector is turned
off. Implement the connection with AC power shut off.
• Be sure to ground the equipment to ensure safety. Use a power cable that meets the standards and power supply voltage of
the country where you are using the projector, and always connect the equipment to the ground. If the ground is not con-
nected, it may cause electrical shocks.
• When connecting the power cable plugs to the AC IN and the electrical outlet, securely insert the plugs all the way in.
• For C2 connection, be sure to install the power cord stopper. If the connection between the power cable plug and the electri-
cal outlet is loose, the plug area may generate heat, causing burns and accidents.
CAUTION
• This equipment is designed to be used in the condition of the power cord connected to earth. If the power cord is not con-
nected to the earth, it may cause electric shock. Please make sure the power cord is earthed properly.
26