Memory - NEC NC1700L Installation Manual

4-3-6. Memory

This menu is the service personnel menu. For the using service personnel menu, refer to "4-1-1. When You Use the Service
Personnel Menu" (page 90).
The selected lens memory (lens adjustment value) and the content of the light memory (light output power value) can be
overwritten with the current settings. Press the LEFT/RIGHT buttons to select the light memory or the lens memory then press
the "ENTER" button to display the confirmation screen. Select "Yes" in the confirmation screen, and then press the ENTER
button. The selected memory (light memory or lens memory) is overwritten with the current settings.
• Lens memory and light memory cannot be newly registered. Use DCC to register the lens memory and light
NOTE
memory in advance. Refer to "Digital Cinema Communicator for S2 Installation Manual" for details registering
the lens memory and light memory.
• The lens memory function cannot be used when the lens type is set to "Without Sensor".
Light
Lens
← Select the Light memory or lens memory.
← Select the memory name of the setting to overwrite and press the ENTER button to
display the confirmation screen.
Select to change the values of the light memory settings.
Select to change the values of the lens memory settings.
LCD Menu
103