When You Use The Service Personnel Menu - NEC NC1700L Installation Manual

LCD Menu
Main menu
Installation
(Note)
Configuration (Memory)
(Title Setup) Preset Button
Information Light Output
Lens Type
Preset Button
Usage
Error Code
Version
IP Address
Setup Date
Option Status
(Note) Requires logging into the projector with Advanced User or higher privileges.

4-1-1. When You Use the Service Personnel Menu

To use the menu for service personnel, you need to input the passcode. This section describes how to display the passcode
entry screen and how to enter the passcode. Refer to the Projector Manual for details on how to enter text.
1
Press the MENU button for three seconds or longer.
The passcode input screen will be displayed on the LCD screen at the projector's control panel.
Press the EXIT button to return to the original screen.
2
Enter the passcode and press the ENTER button.
If you make a mistake during input, you can move the cursor by pressing the LEFT/RIGHT buttons and overwrite the
passcode.
If the passcode is correct, you can use the menu for service personnel.
When you enter the password, pay enough attention to people around for the password abuse prevention.
NOTE
If you have anxiety the password is cheated, change the password immediately.
Before entering the password, inspect the password entry device (such as remote controller and/or keypad on
the projector) for any evidence of physical tampering. In the event that any suspicious markings are present
(such as gouges, extraneous wiring, adhesive materials, etc.) "DO NOT" enter the password and consult with
the distributor.
Always store the password, remote controller, and projector in a safe place and never divulge the password to
unauthorized entities.
Entered password is indicated with * on the LCD.
In case entered password characters are indicated on the LCD, it is machine trouble. Consult with the distributor.
90
Submenu
(Sensor Calib.) Calibrate the sensors upon installation.
Light The content of the selected light memory (light output power
value) can be overwritten with the current settings.
Lens The content of the selected lens memory can be overwritten with
the current settings.
Preset Button 1–16 Sets the title to be assigned to the preset buttons (<1> to <8>
buttons).
Displays the light source output setting.
Displays the lens type setting.
Preset Button 1–16 Displays the titles which are assigned to the preset buttons (<1>
to <8> buttons).
Displays information related to projector usage.
Displays the currently occurring error.
System Displays the model name and various version information about
the projector.
IMB Displays the vendor name and version information about the
media block (IMB).
System Displays the IP address of the projector.
Displays the date when the projector was set up (starting date of
the warranty period).
Displays the link status of the device mounted in slot and
projector.
Description
Reference
page
102
103
103
104
105
105
105
106
106
107
107
107
108
108