Connecting The Control Cable - NEC NC1700L Installation Manual

2-8-2. Connecting the Control Cable

To monitor the state of the chiller unit and control ON/OFF of the unit from the projector, connect the control cable.
1
Connect the chiller unit control port (RJ-45) on the projector and the connector for communica-
tion line (RJ-45) on the chiller unit with the control cable supplied as an accessory.
Chiller unit control port (RJ-45)
REMOTE
LAN
RS-232 3D GP I/O
USB
Setting Up Your Projector and Chiller Unit
Connector for
communication
line (RJ-45)
Control cable
73