Stanley Crimp Software - Stanley IBC600 User Manual

STANLEY CRIMP SOFTWARE

STANLEY Crimp software provides valuable data about
each crimp. It is also required to update the tool firmware.
INSTALLATION
1. Download the STANLEY Crimp software from the
STANLEY Infrastructure website.
www.stanleyinfrastructure.com/products/cordless-td
Note: STANLEY Crimp software requires a minimum
of Windows XP SP3 running with administrator
rights.
2. Follow the prompts to complete installation.
3. Connect IBC600 to a PC using a micro USB cable.
Note: InteLED will shine blue when connected.
FIRST RUN
1. Run the software using the STANLEY Crimp
software icon on your Windows desktop.
2. You will be prompted to register your software. Left
click the "User Registration" button.
3. Fill out the registration form and click the "Register"
button.
USER SELECTION
1. Click the "New User" button.
2. Enter the required user information and click "Create".
3. Select a user and click "OK".
OPERATION
IBC600 USB Connection
IBC600 User Manual ◄ 11