Table of Contents
Advertisement
Introduction
9
Wireless LED
The Wireless LED blinks green when the Access Point receives data packets over the
wireless network.
Ethernet LED
The Ethernet LED blinks green when the Access Point receives data packets over the
Ethernet port.
Rear Panel
Figure 2: Harmony 802.11a Access Point Model 8570 Rear Panel
Ethernet Port
This port connects the Access Point to your 10/100Base-T Ethernet network using a
straight-through Ethernet cable.
Ethernet Link/Activity LED
The Link LED is lit solid green when the Access Point is connected at 100 Mbps to the
Ethernet network, and lit solid amber when connected at 10 Mbps. It will blink to
indicate activity on the Ethernet network.
Advertisement
Table of Contents
